Alvarion BreezeACCESS VL 5.4 System Manual page 123

Configuration Download and Upload Using TFTP
The BreezeACCESS OFDM Configuration Download/Upload feature simplifies the
task of remotely configuring a large number of units using TFTP protocol. By
downloading the configuration file to a PC it is possible to view all the parameters
configured for the unit, as a plain ASCII text file. It is necessary to edit the file
using a simple editor and remove certain parameters or change their values prior
to uploading the configuration to another unit.
When multiple configurations are being done simultaneously, which means that
the file is being uploaded to several units, it is recommended that the file only
include the required parameters.
In the configuration file, each parameter is represented by three fields:
1.
A symbolic string similar to the name of the parameter in the Monitor
program, followed by "=".
2.
The value of the parameters, which uses the same values as the Monitor
program.
3.
An optional comment. If used, the comment should start with a ";" character.
An unknown parameter will be ignored. A known parameter with a value that is
invalid or out-of-range will be set by the unit to its default value.
Use the SNMP write community string (the default is private) to define both the
uploaded file (put) and the downloaded file (get). Use the extension cfg for a
configuration file. Use the extension cmr for the Operator Defaults file. The file
should be transferred in ASCII mode.
For Example:
To upload the configuration file using a DOS based TFTP Client to an SU whose IP
address is 206.25.63.65, enter:
tftp 206.25.63.65 put Suconf private.cfg
To download the Operator Defaults file from the same unit, enter:
tftp 206.25.63.65 get private.cmr Suconf
Appendix B
Configuration
Download and
Upload Using
B-1
TFTP