Alvarion BreezeACCESS VL 5.4 System Manual page 67

Operation and Administration
FTP File Name
FTP Host IP Address
FTP Client IP Address
FTP User Name
FTP Password
♦ Configuration File Upload Download Parameters: The parameters for
Configuration file upload/download using FTP, as defined in Unit
Control menu.
FTP Source Dir
Configuration File Name
Operator Defaults File Name
FTP Host IP Address
FTP Client IP Address
FTP User Name
FTP Password
The following parameters are displayed for Subscriber Units only:
♦ Unit Status: The current status of the SU. There are two status
options:
SCANNING: The SU is searching for an AU with which to associate.
ASSOCIATED: The SU is associated with an AU.
♦ AU MAC Address: The MAC address of the AU with which the unit is
currently associated. If the unit is not associated with any AU, the
address defaults to the IEEE broadcast address, which is
FF-FF-FF-FF-FF-FF.
The following parameters are displayed for Access Units only:
♦ Current Number of Associations: The total number of SUs associated
with this AU. This number may include units that are not currently
active since there is no aging algorithm for associated SUs.
NOTE:
An SU is only removed from the list of associated SUs under the following conditions:
a. A SNAP frame is received from another AU indicating that the SU is now
associated with the other AU.
b. The SU failed to respond to a certain number of consecutive frames transmitted by
the AU and is considered to have "aged out".
Show Basic Configuration
The Show Basic Configuration menu is a read-only menu that displays the
current values of the parameters included in the Basic Configuration
menu.
5-7