Alvarion BreezeACCESS VL 5.4 System Manual page 74

5-14
The default is config.cfg.
♦ Operator Defaults FTP File Name: The Operator Defaults File Name
option enables defining the name of the Operator Defaults file to be
uploaded/downloaded.
Valid values: A string of up to 80 printable ASCII characters. Enter "."
to clear the field.
The default is operator.cmr.
♦ FTP Client IP Address: The FTP Client IP Address option enables
defining the IP address of the FTP client in the unit. This secondary IP
address is required only to support the optional FTP process.
The default is:
♦ FTP Host IP Address: The FTP Host IP Address option enables
defining the IP address of the FTP server that is hosting the file.
The default is:
♦ FTP User Name: The FTP User Name option enables defining the user
name to be used for accessing the FTP server that is hosting the file.
Valid values: A string of up to 20 printable ASCII characters.
The default is:
♦ FTP Password: The FTP Password option enables defining the
password to be used for accessing the FTP server that is hosting the
file.
Valid values: A string of up to 20 printable ASCII characters.
The default is:
♦ Show Configuration File Upload/Download Parameters: Displays
the current values of the Configuration File Upload/Download
parameters.
NOTE:
There is one set of general FTP parameters (FTP Source Dir, FTP Host IP Address, FTP
Client IP Address, FTP User Name and FTP Password). This set serves both the SW
Download Procedure and the Configuration File Upload/Download procedure. Changing
any of these parameters in the menu for either procedure will automatically change its
value in the menu for the other procedure.
Log Out Timer
The Log Out Timer parameter determines the amount of inactive time
following which the unit automatically exits the Monitor program.
The time-out duration can range from 1 to 999 minutes.
The default value is 5 minutes.
BreezeACCESS VL System Manual