Alvarion BreezeACCESS VL 5.4 System Manual page 119

Operation and Administration
Set User Filter Range
The Set User Filter Range option enables defining a range of addresses for
each of the User Filter IP Address entries The range includes the base
address.
Available values range from 0 to 255.
The default value is 0 (not used).
NOTES:
You can enter either a mask or range, but not both, to define a group of user filter
addresses.
If IP broadcast packets are supposed to reach a device behind an SU unit, the broadcast
IP address must be included in the list of user filter addresses.
Delete a User Filtering Entry
The Delete a User Filtering Entry option enables deleting a selected entry
from the User Filtering list. The entry is replaced by the default value.
Delete All User Filtering Entries
The Delete All User Filtering Entries option enables deleting all entries
from the User Filtering list. .The list entries are replaced by the default
values.
Show All User Filtering Parameters
The Show All User Filtering Parameters option displays the current value
of the User Filtering Option and the list of User Filtering addresses, subnet
masks and ranges.
5-59