Alvarion BreezeACCESS VL 5.4 System Manual page 49

Commissioning
Parameter
Initial Transmit Power (SU)
ATPC Option
Best AU Support (SU)
Preferred AU MAC Address (SU)
Maximum Data Rate (SU)
Multi Rate Support
VLAN Link Type
VLAN ID-Management
Authentication Algorithm
Default Key ID (SU)
WEP Key
NOTE:
Once the basic parameters are configured, the unit must be reset in order to activate the
new configuration.
Default Value
AU: Disable
SU: Enable
Disable
00-00-00-00-00-00
54 Mbps
Hybrid
65535
Open System
1
0000000000 (none)
Comment
For setting the Initial Transmit
Power at the SU, refer to
Configuring the Initial
Transmit Power Level on
page 4-6.
Applicable only when Best AU
Support is enabled
For configuring the Maximum
Data Rate at the SU, refer to
Configuring the
Maximum Data Rate on
page 4-8.
In the SU, can be changed to
Shared Key only after
configuring the WEP Key and
the applicable Default Key ID.
In the AU, at least one WEP
Key must be configured
4-3