Alvarion BreezeACCESS VL 5.4 System Manual page 4

BreezeACCESS VL System Manual
iv
FCC Radio Frequency Interference Statement
The Subscriber Unit equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to EN300385 rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a residential environment notwithstanding use in
commercial, business and industrial environments. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to
radio communications.
The Base Station equipment has been tested and found to comply with the
limits for a class A digital device, pursuant to EN300385 rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in commercial, business and industrial
environments. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference
at the user's own expense.
IMPORTANT NOTE:
To comply with FCC RF exposure requirement, the antenna used for this
transmitter must be fixed-mounted on outdoor permanent structures with a
separation distance of at least 2 meter from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter.
R&TTE Compliance Statement
This equipment complies with the appropriate essential requirements of Article
3 of the R&TTE Directive 1999/5/EC.
Safety Considerations
For the following safety considerations, "Instrument" means the
BreezeACCESS VL units' components and their cables.
Caution
To avoid electrical shock, do not perform any servicing unless you are qualified
to do so.
Line Voltage
Before connecting this instrument to the power line, make sure that the voltage
of the power source matches the requirements of the instrument.