6000A Series Oscilloscope Front-Panel Controls - Agilent Technologies MSO6012A User Manual

2 Front-Panel Controls

6000A Series Oscilloscope Front-Panel Controls

N O T E
64
This is an introduction to the front-panel controls of the Agilent
6000A Series oscilloscope. Generally, you set up the front-panel
controls and then make a measurement.
The keys on the front panel bring up softkey menus on the
display that provide access to oscilloscope features. Many
softkeys use the Entry knob
Six softkeys are located below the display. To understand the
symbols used in the softkey menus and throughout this guide,
see "Conventions" on page 65.
Note that the Digital Select key, not the Entry knob, is used to
select digital channels when you want to reposition a digital
channel waveform.
The simplest way to set up the oscilloscope is to connect it to the signals
of interest and press the AutoScale key.
to select values.
6000 Series Oscilloscope User's Guide