Download  Print this page

Print Setup - Fujitsu FI-718PR Operator's Manual

Imprinter
Hide thumbs

Advertisement

HINT
When you wish to print on a section near the edge of wide
paper, remove the paper guide in order to open space for
the print cartridge, and attach the removed guide in the
center.
For Right-Edge Printing
For Left-Edge Printing
To Remove the Paper Guides>
<
Pressing and holding together with your fingers, as below,
lift up and pull away the guide.
<To Attach the Paper Guides>
1.
Put the paper guides in place as in the picture on
the left.
Paper guide
Paper guide
2.
Push in the top portion of the guide to fit tightly.
Paper guide

3.3. Print Setup

You can configure settings for the imprinter by using the
scanner driver's setup dialog box.
PaperStream IP (TWAIN) driver (Example)
Configure the settings in [Imprinter] of the [Endorser] menu in
standard mode.
fi-718PR Imprinter Operator's Guide | 9

Advertisement

Table of Contents
loading

  Also See for Fujitsu FI-718PR

  Related Manuals for Fujitsu FI-718PR