Download  Print this page

Basic Operation; Setting The Print Position; How To Use The Paper Guides - Fujitsu FI-718PR Operator's Manual

Hide thumbs


3. Basic Operation

3.1. Setting the Print Position

To position the print cartridge for printing:
Open the print cartridge cover.
Hold the print cartridge holder, as below, and
slide it to the left or right within the document
width to set it at a suitable print starting position.
● The triangle-shaped protrusion on the locking lever of the
print cartridge holder indicates the current print position on
the page.
● In the upper back of the print cartridge holder are the
document size markings; use them to adjust for paper
sizes and printing positions.
● Put the actual document in the ADF and confirm that the
print cartridge is positioned within the document's width.
8 |

3.2. How to Use the Paper Guides

Use the paper guides to prevent paper jams due to curling of
the edges, as shown below.
Place the paper guides at the ends where the paper edges
will pass through.
Load the document in the scanner.
Open the print cartridge cover.
Slide the paper guides to the left and right edges
of the paper.
Paper guides
Be careful not to let the paper guide touch or catch onto the
print circuit film.
Feed direction


Table of Contents

  Also See for Fujitsu FI-718PR

  Related Manuals for Fujitsu FI-718PR