The wireless Access Point does not have a power switch. It is powered on when its Ethernet port is connected
to the power injector module, and the power injector module is connected to an AC power source. The power
injector includes one LED indicator that turns on when AC power is applied.
The power injector module automatically adjusts to any AC voltage between 100-240 volts at 50 or 60
Hz. No voltage range settings are required.
W
:
The power injector module is designed for outdoor use only. Never mount the power injector
ARNING
outside with the wireless Access Point unit.
Wall- and Pole-Mounting Bracket Kits
The wireless Access Point includes bracket kits that can be used to mount the Access Point to a wall, pole,
radio mast, or part of a tower structure.