Table of Contents
Advertisement
Aruba 80 8-Pin DIN Ethernet Connector Pinout
The Ethernet cable from the power injector connects to an 8-pin DIN connector on the Aruba 80 outdoor
wireless Access Point. This connector is described in the following figure and table.
8-Pin DIN Ethernet Port Pinout
Pin
Signal Name
1
Transmit Data plus (TD+)
2
Transmit Data minus (TD)
3
Receive Data plus (RD+)
4
+48 VDC power
5
+48 VDC power
6
Receive Data minus (RD-)
7
Return power
8
Return power
Note: The "+" and "-" signs represent the polarity of the wires that make up each wire pair.
Aruba 80 8-Pin DIN to RJ-45 Cable Wiring
To
an extended Ethernet cable to connect from the power injector's RJ-45 Output port to the
construct
wireless Access Point's 8-pin DIN connector, follow the wiring diagram below. Use Category 5 or better
UTP or STP cable, maximum length 100 m (328 ft), and be sure to connect all four wire pairs.
N
:
To construct a reliable Ethernet cable, always use the proper tools or ask a professional
OTE
cable supplier to construct the cable.
Advertisement
Table of Contents
