Table of Contents
Advertisement
Using the Web-based Management Setup Wizard
There are only a few basic steps you need to complete to set up the wireless bridge for your network. The
Setup Wizard takes you through configuration procedures for the radio channel selection, IP configuration,
and basic WEP encryption for wireless security.
The wireless bridge can be managed by any computer using a web browser (Internet Explorer 5.0 or above, or
Netscape Navigator 6.2 or above). Enter the IP configured for the unit or the default IP address:
http://192.168.1.1
Logging In – Enter the default username "admin" and click LOGIN (there is no default password). For
information on configuring a user name and password.
The home page displays the Main Menu.
Launching the Setup Wizard – To perform initial configuration, click Setup Wizard on the home page, then
click on the [Next] button to start the process.
Advertisement
Table of Contents
