Aruba 203H Installation Manual
Aruba 203H Installation Manual

Aruba 203H Installation Manual

Hospitality access points
Hide thumbs Also See for 203H:

Advertisement

Aruba 203H Hospitality Access Points
The Aruba 203H access points (APs) are high-performance flex-radio (software configuable as either single radio
dual-band or dual radio) wireless devices for hospitality and branch deployments. These access points use
Multiple-Input, Multiple-Output (MIMO) technology to provide secure wireless connectivity for both 2.4GHz
802.11 b/g/n and 5GHz 802.11 a/n/ac WiFi.
This device must be professionally installed and serviced by a trained ACMP or similar Aruba-certified
technician. Aruba access points are classified as radio transmission devices, and are subject to government
regulations of the host country. The network administrator(s) is/are responsible for ensuring that configuration
!
and operation of this equipment is in compliance with their country's regulations. For complete list of
CAUTION
approved channels in your country, refer to the Aruba Downloadable Regulatory Table at
support.arubanetworks.com.

Package Contents

203H access point
Single gang wall-box mounting bracket
2x #6-32 machine screws
A security tool
A security tool is provided with every ten access points.
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton,
including the original packing materials. Use these materials to repack and return the unit to the supplier if
needed.
203H Hardware Overview
Figure 1
LEDs
The 203H has three LEDs that indicate the system, radio and E1 port status of the device. These LEDs can be
configured via software into three separate modes:
Rev02 |
March 2017
Front
Installation Guide
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 203H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Aruba 203H

  • Page 1: Package Contents

    203H Hardware Overview Front Figure 1 LEDs The 203H has three LEDs that indicate the system, radio and E1 port status of the device. These LEDs can be configured via software into three separate modes: Rev02 | March 2017...
  • Page 1: Package Contents

    203H Hardware Overview Front Figure 1 LEDs The 203H has three LEDs that indicate the system, radio and E1 port status of the device. These LEDs can be configured via software into three separate modes: Normal mode (by default): See Table 1 ...
  • Page 2 Normal mode (by default): See Table 1  Off mode: All LEDs off  Blink mode: All LEDs blink green (synchronized)  203H LEDs Status in Normal Mode Table 1 Color/State Meaning System Device powered off Green- Blinking Device booting, not ready for use...
  • Page 2 203H LEDs Status in Normal Mode Table 1 Color/State Meaning System Device powered off Green- Blinking Device booting, not ready for use Green- Solid Device ready for use, no restrictions Green- Flashing Device ready for use, uplink negotiated in sub optimal speed (<1Gbps)
  • Page 3: Before You Begin

    Console Port Ethernet Port The 203H access point is equipped with two Ethernet ports (E0 and E1). The E0 is a 10/100/1000 Base-T auto- sensing MDI/MDX wired-network uplink connectivity port. It supports IEEE 802.3af Powerover Ethernet (PoE), accepting 48V DC as a standard powered device (PD) from power sourcing equipment (PSE), including PoE midspan injector or a PoE-sourcing network infrastructure.
  • Page 3: Before You Begin

    Ethernet Port The 203H access point is equipped with two Ethernet ports (E0 and E1). The E0 is a 10/100/1000 Base-T auto- sensing MDI/MDX wired-network uplink connectivity port. It supports IEEE 802.3af Powerover Ethernet (PoE), accepting 48V DC as a standard powered device (PD) from power sourcing equipment (PSE), including PoE midspan injector or a PoE-sourcing network infrastructure.
  • Page 4: Verifying Pre-Installation Connectivity

    After WLAN planning is complete and the appropriate products and their placement have been determined, the Aruba controller(s) must be installed and initial setup performed before the Aruba access points are deployed. For initial setup of the controller, refer to the Quick Start Guide for the software version installed on your controller.
  • Page 4: Verifying Pre-Installation Connectivity

    Refer to the Quick Start Guide for instructions on locating and connecting to the controller. Identifying Specific Installation Locations Use the access point placement map generated by Aruba’s RF Plan software application to determine the proper installation location(s). Each location should be as close as possible to the center of the intended coverage area and should be free from obstructions or obvious sources of interference.
  • Page 5 Refer to the Quick Start Guide for instructions on locating and connecting to the controller. Identifying Specific Installation Locations Use the access point placement map generated by Aruba’s RF Plan software application to determine the proper installation location(s). Each location should be as close as possible to the center of the intended coverage area and should be free from obstructions or obvious sources of interference.
  • Page 5 The 203H access point is designed to mount into a variety of electrical gang boxes. 1. Remove the existing data wall plate (if applicable). 2. Remove any existing RJ45 connectors (typically snap-in) or cut/remove the UTP cable. 3. Use a short Ethernet cable (sold separately) to connect the E0 port to an RJ45 connector, or crimp an RJ45 plug (not supplied) on the cable and insert into the E0 port.
  • Page 6: Connecting Required Cables

    6. Connect any required cables to the back of the 203H access point. 7. Align the mounting slots on the back of the access point over the corresponding mounting posts on the...
  • Page 6: Connecting Required Cables

    For additional specifications on this product, please refer to the product data sheet at www.arubanetworks.com/ safety_addendum. All Aruba access points should be professionally installed by an Aruba Certified Mobility Professional (ACMP). The installer is responsible for ensuring that grounding is available and meets applicable national and electrical codes.
  • Page 7: Regulatory Information

    For additional specifications on this product, please refer to the product data sheet at www.arubanetworks.com/ safety_addendum. All Aruba access points should be professionally installed by an Aruba Certified Mobility Professional (ACMP). The installer is responsible for ensuring that grounding is available and meets applicable national and electrical codes.
  • Page 7: Regulatory Information

    Tous les points d'accès Aruba doivent impérativement être installés par un professionnel agréé. Ce dernier doit s'assurer que l'appareil est mis à la terre et que le circuit de mise à la terre est conforme aux codes électriques nationaux en vigueur.
  • Page 8: Industry Canada

    Temperature: -40°C to +70°C (-40°F to +158°F)  Regulatory Information The regulatory model name for the 203H access point is APINH203. This device is electronically labeled. To view the FCC ID for controller-managed access points: 1. Log into the controller WebUI 2.
  • Page 8: Industry Canada

    Systems. Users are advised that high power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850MHz and that these radars could cause interference and/or damage to LE-LAN devices. Aruba 203H Hospitality Access Points | Installation Guide...
  • Page 9: Eu Regulatory Conformance

    5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL EU Regulatory Conformance Aruba Networks Inc., hereby declares that this product is in compliance with the directives listed below EMC Directive 2014 ...
  • Page 9: Eu Regulatory Conformance

    5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL EU Regulatory Conformance Aruba Networks Inc., hereby declares that this product is in compliance with the directives listed below EMC Directive 2014/30/EU ...
  • Page 10: Нормативные Требования Евразийского Экономического Союза

    Compliance and Aruba products, visit www.arubanetworks.com. Waste of Electrical and Electronic Equipment Aruba products at end of life are subject to separate collection and treatment in the EU Member States, Norway, and Switzerland and therefore are marked with the symbol shown at the left (crossed-out wheelie bin).
  • Page 10: Нормативные Требования Евразийского Экономического Союза

    이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용 환경에서 사용하는 경우 전파간섭 의 우려가 있습니다 . => 사용자 안내문은 “ 업무용방송통신기자재 ’ 에만 해당된다 Hong Kong HK0021700059 Philippines Type-Approval No. ESD-1715015C Aruba 203H Hospitality Access Points | Installation Guide...
  • Page 11: Proper Disposal Of Aruba Equipment

    Hewlett Packard Enterprise Company Attn: General Counsel 3000 Hanover Street Palo Alto, CA 94304 Warranty This hardware product is protected by an Aruba warranty. For details, see Aruba Networks standard warranty terms and conditions. www.arubanetworks.com 3333 Scott Blvd Santa Clara, CA 95054...
  • Page 11: Proper Disposal Of Aruba Equipment

    Compliance and Aruba products, visit www.arubanetworks.com. Waste of Electrical and Electronic Equipment Aruba products at end of life are subject to separate collection and treatment in the EU Member States, Norway, and Switzerland and therefore are marked with the symbol shown at the left (crossed-out wheelie bin).
  • Page 12 All Aruba access points should be professionally installed by an Aruba Certified Mobility Professional (ACMP). The installer is responsible for ensuring that grounding is available and meets applicable national and electrical codes. Tous les points d'accès Aruba doivent impérativement être installés par un professionnel agréé. Ce dernier doit s'assurer que l'appareil est mis à...
  • Page 12 China RoHS Aruba products also comply with China environmental declaration requirements and are labeled with the “EFUP 10” label shown at the left. Aruba 203H Hospitality Access Points | Installation Guide...
  • Page 13: Taiwan Rohs

    Aruba Networks provides a multi-language document that contains country-specific restrictions and additional safety and regulatory information for all Aruba access points. This document can be viewed or downloaded at www.arubanetworks.com. This device is electronically labeled. To view the FCC ID for controller-managed access points: 1.
  • Page 13: Taiwan Rohs

    〇 〇 〇 〇 讀寫元件(CD/DVD/ 磁 − 〇 〇 〇 〇 〇 機) 選配 變壓器/電源供應器 選配 − 〇 〇 〇 〇 〇 備考1.〝〇 係指該項限用物質之百分比含量未超出百分比含量基準 。 備考2.〝− 係指該項限用物質為排除項目。 選配單元使用於特定產品型號,詳細規格請參照產品說明書。 Turkey RoHS Ukraine RoHS Aruba 203H Hospitality Access Points | Installation Guide...
  • Page 14 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL EU Regulatory Conformance Aruba Networks Inc., hereby declares that this product is in compliance with the directives listed below EMC Directive 2014 ...
  • Page 14 Hewlett Packard Enterprise Company Attn: General Counsel 3000 Hanover Street Palo Alto, CA 94304 Warranty This hardware product is protected by an Aruba warranty. For details, see Aruba Networks standard warranty terms and conditions. Aruba 203H Hospitality Access Points | Installation Guide...
  • Page 15: Table Of Contents

    Solder used in printed circuit assemblies), Cadmium, Mercury, Hexavalent Chromium, and Bromine. Some Aruba products are subject to the exemptions listed in RoHS Directive Annex 7 (Lead in solder used in printed circuit assemblies). Products and packaging will be marked with the “RoHS” label shown at the left indicating conformance to this directive.

This manual is also suitable for:

Apinh203

Table of Contents