Mounting The Ap; Using The Pole-Mounting Bracket - Aruba AP-80MB Installation Manual

Mounting the AP

Using the Pole-Mounting Bracket

Perform the following steps to mount the unit to a 1.5 to 2 inch diameter steel pole or tube using the
mounting bracket:
1. Always attach the bracket to a pole with the open end of the mounting grooves facing up.
2. Place the U-shaped part of the bracket around the pole and tighten the securing nut just enough to hold the
bracket to the pole. (The bracket may need to be rotated around the pole during the alignment process.)
Attach bracket to pole with
mounting grooves facing up
3. Use the included nuts to tightly secure the wireless Access Point to the bracket. Be sure to take account of the
antenna polarization direction; both antennas in a link must be mounted with the same polarization.