Table of Contents
Advertisement
Package Checklist
Package Contents
The Aruba 80 Outdoor Wireless Access Point package includes:
One Aruba 80 Outdoor Wireless Access Point (Models AP-80MB or AP-80SB)
Pole / Mast Mounting Hardware
Installation Guide (this manual)
Inform your supplier if there are any incorrect, missing or damaged parts. If possible, retain the
carton, including the original packing materials. Use them to repack the product in case there is a
need to return it.
Optional Items
The following optional items can also be ordered for the Aruba 80 Outdoor Wireless Access Point:
Detachable antennas (see Table C-3, "Detachable Antennas," on page 42)
Kit (TX) – Indoor (AP-AC-80-1)
Indoor Use Only Auto-sensing 110/240VAC to 48VDC Power over Ethernet Injector suitable for
use with all Aruba AP-80 Series Wireless Access Points.
100 foot Outdoor Ethernet cable (8Pin DIN to 10/100Base-T RJ-45).
Aruba Outdoor Antenna Cable Extension – 10' (AP-CBL-1)
10' long low-loss LMR 400 antenna extension cable for use with AP-80 Outdoor Access Points,
interfaces AP-80 N-Type Female interface to N-Type Male on antenna.
Aruba Antenna Lightning Arrester N-Type (AP-LAR-1)
The Lightning Surge Arrester for the AP-80 Series Access Points is a single, In-line lightning arrester
with N-type Male to N-type Female interface. Supports RF frequency pass through of 2Ghz – 6Ghz.
Check with your Aruba sales representative for the availability of optional items.
Aruba 80 AC Power Adapter
Advertisement
Table of Contents
