Edid 101 Features - Extron electronics EDID 101D User Manual

Introduction

EDID 101 Features

EDID Minder — Enables continuous EDID communication
EDID Record — Enables the device to record EDID directly
Pre-programmed EDID — The EDID 101 contains
N
Powered from the video source — The EDID 101 is powered
Power LED — The side panel LED illuminates green when
Compact size — Small form factor enables use in places where
EDID 101D/EDID 101V • Introduction
2
to the input source. EDID provides information about
a display identity. The EDID Minder continuous EDID
communication helps ensure the source boots up properly
and reliably outputs content to the display.
from a display.
pre-programmed EDIDs with the most common display
native resolutions for both 50 and 60 Hz. Along with the
native rate, each pre-programmed EDID also lists other
common video rates for use by the video source.
Configuring the EDID 101 rotary and DIP switches
allow a user to select a pre-programmed EDID based on
the native rate of a display (i.e. 1280x1024 @ 60 Hz)
and a desired signal type (i.e. digital), but does not
necessarily force a video source to output that rate. Since
EDID is not limited to reporting a single video rate
(i.e. the native rate), each Extron EDID also lists other
common video rates for use by the video source.
from a VGA or DVI video source for normal operation.
An optional external 12 VDC power supply for remote
learning capability is also available.
power is connected and flashes red during EDID
recording.
space is a premium.