6. Bluetooth Pairing
To pair the RC4 with a Sena Bluetooth headset, press the (+) Button for 8 seconds. Enter Remote
Control Pairing mode on your headset, and the two will be paired shortly.
-
You can control the headset using the RC4 only after you pair them together.
-
The RC4 supports Sena headsets with Bluetooth 4.1.
7. Factory Reset
To return the RC4 into factory default settings, press the (+) Button, Center Button, and the (-)
Button for 1 second.
8. Headset Control
To control your headset using the RC4, please refer to the Quick Reference Guide for button
operations on functions such as phone, music, and intercom.
CERTIFICATION AND SAFETY APPROVALS
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: