Advanced Selective Pairing: A2Dp Stereo Or Handsfree - Sena LinkIn Ride Pal III User Manual

Note:
1. The Sena SR10 is a Bluetooth two-way radio
adapter for group communication, and uses
Hands-Free Profile. The incoming audio from
the two-way radio via SR10 is heard in the
background while having an intercom
conversation or a mobile phone call.
2. The GPS navigation or a radar detector could
be connected to the SR10 by wire. The GPS
voice instruction or the radar detector alarm
is also heard in the background via SR10
while having an intercom conversation or a
phone call. Please refer to the SR10 User's
Guide for details.
2.3 Advanced Selective Pairing:
A2DP Stereo or Handsfree
When you are using a smartphone, sometimes
you may need to selectively use the headset
for A2DP stereo music only or for mobile phone
handsfree only. These instructions are for
advanced users who want to pair the headset
to their smartphones with only one selective
profile: A2DP for stereo music of HFP for phone
calls.
If you have previously paired a mobile phone
to the headset, you must clear the previous
pairing list on both devices: the mobile phone
and the headset. To clear the pairing list on the
headset, please do a factory reset or following
the pairing list clearing procedure described in
section 8.10, "Factory Reset" or 8.9, "Delete All
Bluetooth Pairing Information". To clear the
pairing list on the mobile phone, please refer to
the mobile phone manual. For most
smartphones, delete the headset from the list
of Bluetooth devices in the settings menu.
EN
9