Install Uim Card; Remove Uim Card; How To Power On Off; Security Password - Haier M560C User Manual

Hide thumbs Also See for M560C:

Table of Contents

Enlarged version

2.3 Install UIM card

• When UIM card is not used, carefully put it in a secure place.

• UIM card is easy to be damaged because of scratching or

bending, so it should be used carefully.

When you perform following operations, ensure the cell phone

is powered off and separated with charger. Remove the battery

and put UIM card in fixer. While inserting UIM card, ensure the

metal side faces downward and aim the cut-corner of UIM card at

that of UIM card slot.

When you perform following operations, ensure the cell phone is

powered off and separated with charger.

Remove the battery and take out UIM card from holder.

Note: UIM card is a computer chip containing protocol details,

security information and personal phonebook, etc.

2.5 How to power on/off

Ensure battery is properly installed.

Power on and hold [End key] button until boot screen appears.

Some UIM cards have PIN code protection. If there is prompt for

input your PIN code, input your PIN code and then press [OK].

Default PIN code is

After power on, if UIM card inserted is valid, your cell phone will

automatically search available network; If not, it will prompt: No

UIM card is available.

To power off, hold [End key] until shutdown screen appears.

You can use access password to avoid unauthorized use of your

UIM card.

PIN code

PIN code is used to prevent illegal use of user's UIM card. If your

cell phone has enabled PIN code protection, there will be prompt

for entering PIN code. If wrong PIN code is entered for three times,

UIM card will be automatically locked. You have to enter PUK

1234.

Table of Contents