Instructions Before Use; Install Or Remove The Battery; Charge Battery; Install/Remove Sim Card - Haier B8305 User Manual

1.77inch 3g feature phone

Table of Contents

2.1.1 Install battery

1. Aim the small button at the bottom of battery to corresponding slot at the

bottom of battery bank.

2. Press battery towards the cell phone and press it until it is locked.

2.1.2 Remove the battery

Guaranteed that your handset is at the close-down condition.

Holds down at the back of the handset, the downward glide outer covering, then

unloads the battery exterior top plate.

1．Holds down at the back of the handset, the downward glide outer covering,

then unloads the battery exterior top plate.

2．Under covers in the chart the battery to buckle hand's position, lifts gently the

battery and takes down.

Hold buttons at the two sides of the battery charger and then plug the charger to

the charging socket at the bottom of cell phone。

Note: Please handle carefully. Do not pull out charging plug by force.

This may damage your cell phone or charger.

• Before use, battery supplied with your cell phone should be completely

charged.

• While charging, do not remove the battery or SIM card.

• Once battery is used up, the cell phone will shutdown automatically.

• When SIM card is not used, carefully put it in a secure place.

• SIM card is easy to be damaged because of scratching or bending, so it should

be used carefully.

When you install SIM card, ensure the cell phone is powered off and separated

with charger. Remove the battery and put SIM card in fixer. While inserting SIM

card, ensure the metal side faces downward and aim the cut-corner of SIM card

at that of SIM card slot.

When you remove SIM card, ensure the cell phone is powered off and

separated with charger.

Remove the battery and take out SIM card from holder.

Instructions before Use

Table of Contents