Caliper Piston Removal - SRAM code rsc 2018 Service Manual

C a l i p e r P i s t o n R e m o v a l
DOT fluid will damage painted surfaces. If any fluid comes in contact with a painted surface (e.g. your frame) or printing on the brakes, wipe it off
immediately and clean it with isopropyl alcohol or water. Damage to painted and/or printed surfaces by DOT fluid is not covered under warranty.
1 Install the pad retention bolt.
Insert the pad spreader so that it snaps onto the pad retention bolt.
2
Squeeze the brake lever repeatedly to advance the pistons, and stop
when they contact the pad spreader.
3 Remove the caliper, mounting bolts, and hardware.
N OT ICE
2.5 mm
T25 or 5 mm
Pad Spreader Tool
15 mm Thru Axle

Caliper Piston Removal

9