Piston Assembly Removal - SRAM code rsc 2018 Service Manual

P i s t o n A s s e m b l y R e m o v a l
DOT fluid will damage painted surfaces. If any fluid comes in contact with a painted surface (e.g. your frame) or printing on the brakes, wipe it off
immediately and clean it with isopropyl alcohol or water. Damage to painted and/or printed surfaces by DOT fluid is not covered under warranty.
1 Remove the lever blade bushings.
2 2
Place the tips of the pliers into the eyelets of the snap ring, then
squeeze the pliers to remove the snap ring.
3 Remove the washer.
NOT ICE
Pick
Internal Snap Ring Pliers

Piston Assembly Removal

34