Frigidaire Affinity 6000 Series Service Manual page 38

Section 3 Electronic Control
Failure code
E97 Console control problem
E98 Console control problem
EB1 Incoming power frequency out of limits.
EB2 Incoming line voltage above 130 VAC.
EB3 Incoming line voltage below 90 VAC.
Clogged drain pump.
EF1
EF2 To much soap.
EBE Console control problem
EBF Console control problem
EF5
NTC temperature for hot water valve over the limits.
Fault condition Check
Replace the control board.
Replace the control board.
Refer to test (15)
Check voltage at the outlet.
130 VAC replace the control board.
Check voltage at the outlet.
90 VAC replace the control board.
Unclog the drain pump.
Advise customer to reduce the amount
of soap they are using.
Replace the control board.
Replace the control board.
Hot and cold water hoses switched.
If below
If above
3-10