Door Strike; Loading Door; Loading Door Breakdown - Frigidaire Affinity 6000 Series Service Manual

Section 4 Component Teardown
This section will describe how to access and remove
serviceable components from the washer. Unless stated,
the procedure will be the same on all models. Unless
stated, reverse the procedure to reinstall the component.
Door Strike Removal
1. Open the loading door and extract the (2) screws
holding the strike to the inner door liner.
(See Figure 4-1)
Figure. 4-1.
Loading Door Removal
1. Extract the (3) screws securing the door hinge to
the front panel. (See Figure 4-2)
2. Lift up and out on the door to disengage the hook
on the hinge from the slot in the front panel.
(See Figure 4-3)
Figure 4-2.
4-2
Screws
Screws

Loading Door Breakdown

1. Remove the loading door from the washer and place
it on a soft flat surface.
2. Remove the door strike and the (8) screws holding
the inner liner to the outer liner and lift the inner
liner off. (See Figure 4-4) (continued next page)
Figure 4-3.
Figure 4-4.
Screws