Frigidaire Affinity 6000 Series Service Manual page 14

Section 1 Basic Information
This path allows the water to bypass the dispenser
drawer and enter the tub by the advanced rinsing
technology hose connected between the cavity and the
bellows. (See Figure 1-25)
Figure 1-25.
The detergent dispenser channel receives water from the
right-hand input, as viewed from the front of the washer.
The detergent channel forms a loop that allows the water
to pass over the detergent section of the drawer.
(See Figure 1-26)
Figure 1-26.
As the water pass over the detergent section, holes in
the cavity allows some of the water to enter and fl ush
the detergent cavity. (See Figure 1-27)
Since the fl ow of the incoming water is more than the
holes can dispense, the excess water backs up into a
channel across the rear of the dispenser.
(See Figure 1-28)
1-12
Figure 1-27.
Figure 1-28.
Water in this channel and the mixture from the detergent
drawer fl ow into the tub through the large hose at the
rear of the dispenser. (See Figure 1-29)
Figure 1-29.