NordicTrack Freestride Trainer FS3i User Manual page 8

2. Orient the Frame (1) and the Upright (2) as
shown.
Tip: Avoid pinching the wires. With the help
of another person, attach the Upright (2) to the
Frame (1) with eight M10 x 20mm Hex Screws
(96); start all the Hex Screws, and then
tighten them.
3. Connect the small Main Wire (45) in the left side
of the Upright (2) to the Reed Switch Wire (56) in
the left side of the Frame (1).
Then, connect the large Main Wire (45) in the
right side of the Upright (2) to the Frame Wire
(A) in the right side of the Frame (1).
2
2
Avoid
96
pinching
the wires
96
1
3
45
56
8
96
96
1
2
1
45
A
2
1