Part Identification Chart - NordicTrack Freestride Trainer FS3i User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M4 x 16mm
Screw (98)–4
M6 x 20mm
Patch Screw
(42)–6
M4 x 16mm
Machine Screw
(114)–4
M8 x 14mm
Shoulder
Screw (82)–2
M10 x 45mm
Screw (78)–4
M4 x 20mm M4 x 30mm Screw
Screw (136)–6
M10 x 20mm
Patch Screw (95)–3
M8 Washer
(89)–2
6
(135)–10
M10 x 20mm
Hex Screw (96)–8
M10 Small
Washer (132)–4