NordicTrack Freestride Trainer FS3i User Manual page 9

4. Slide the right Front and Rear Shield Caps
(23, 24) downward and press them onto the
Right Inner and Outer Shields (21, 22).
Repeat this step on the left side of the
elliptical.
5. See the lower drawing. Identify the Right Pedal
Arm (94) and orient it as shown.
See the upper drawing. Using a plastic bag
to keep your fingers clean, apply a generous
amount of the included grease to the axle on the
Right Pedal Arm (94). Then, insert the axle into
the Right Leg (5) from the direction shown.
Attach the Right Pedal Arm (94) with an
M8 x 14mm Shoulder Screw (82), a Leg Cap
(93), and an M8 Washer (89).
Attach the Left Pedal Arm (not shown) to the
Left Leg (6) in the same way.
4
5
6
94
9
24
23
22
21
5
89
Grease
94
93
82