Direct Inputs - GE T60 Instruction Manual

CHAPTER 6: ACTUAL VALUES
actual value is the time synchronizing source the relay is using at present. Possible sources are: Port 1
RTC SYNC SOURCE
PTP Clock, Port 2 PTP Clock, Port 3 PTP Clock, IRIG-B, Other, and None, where "Other" means any less precise source (SNTP,
IEC 103, IEC 104, or DNP). An actual value displays when the relay includes the IEEE 1588 software option.
The is the grandmasterIdentity code being received from the present PTP grandmaster, if any. When the
GRANDMASTER ID
relay is not using any PTP grandmaster, this actual value is zero. The grandmasterIdentity code is specified by PTP to be
globally unique, so one can always know which clock is grandmaster in a system with multiple grandmaster-capable
clocks.
is the estimated maximum time error at present in the RTC, considering the quality information imbedded in the
ACCURACY
received time signal. The value 999,999,999 indicates that the magnitude of the estimated error is one second or more, or
that the error cannot be estimated.
is the present state of the port's PTP clock. The PTP clock state is:
PORT 1...3 PTP STATE
• Disabled is the port's function setting is Disabled
• No Signal if enabled but no signal from an active master has been found and selected
• Calibrating if an active master has been selected but lock is not at present established
• Synch'd (No Pdelay) if the port is synchronized, but the peer delay mechanism is non-operational
• Synchronized if synchronized
is the time difference, measured in nanoseconds, between the fractional seconds portion of the time
PTP - IRIG-B DELTA
being received via PTP and that being received via IRIG-B. A positive value indicates that PTP time is fast compared to IRIG-
B time.

6.3.15 Direct inputs

ACTUAL VALUES  STATUS  DIRECT INPUTS
 DIRECT INPUTS

T60 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
ACCURACY:

999999999 ns
PORT 1 PTP STATE:

No Signal
PORT 2 PTP STATE:

No Signal
PORT 3 PTP STATE:

No Signal
PTP - IRIG-B DELTA:

500000000 ns
AVERATE MSG RETURN

TIME CH1: 0 ms
UNRETURNED MSG

COUNT CH1: 0
CRC FAIL COUNT

CH1: 0
AVERAGE MSG RETURN

TIME CH2: 0 ms
UNRETURNED MSG

COUNT CH2: 0
CRC FAIL COUNT

CH2: 0
DIRECT INPUT 1:

On

Range: 0 to 999,999,999 ns
Range: Disabled, No Signal, Calibrating, Synch'd (No
Pdelay), Synchronized
Range: Disabled, No Signal, Calibrating, Synch'd (No
Pdelay), Synchronized
Range: Disabled, No Signal, Calibrating, Synch'd (No
Pdelay), Synchronized
Range: -500,000,000 to +500,000,000 ns
STATUS
6
6-9