Sources - GE T60 Instruction Manual

METERING
The daily rate loss of life is summarized at 00:00 h, and displayed for the next 24 hour period. The transformer
accumulated loss of life in hours is also available. It can be reset by either changing the
through the
COMMANDS  CLEAR RECORDS  CLEAR LOSS OF LIFE RECORDS

6.4.3 Sources

6.4.3.1 Menu
ACTUAL VALUES  METERING  SOURCE SRC 1
 SOURCE SRC 1

6
This menu displays the metered values available for each source.
Metered values presented for each source depend on the phase and auxiliary VTs and phase and ground CTs assignments
for this particular source. For example, if no phase VT is assigned to this source, then any voltage, energy, and power
values are unavailable.
6.4.3.2 Phase current metering
ACTUAL VALUES  METERING  SOURCE SRC 1  PHASE CURRENT
 PHASE CURRENT
 SRC 1
6-18
 PHASE CURRENT

 SRC 1
 GROUND CURRENT

 SRC 1
 PHASE VOLTAGE

 SRC 1
 AUXILIARY VOLTAGE

 SRC 1
 POWER

 SRC 1
 ENERGY

 SRC 1
 DEMAND

 SRC 1
 FREQUENCY

 SRC 1
 CURRENT HARMONICS

 SRC 1
 VOLTAGE HARMONICS

 SRC 1
SRC 1 RMS Ia: 0.000

b: 0.000 c: 0.000 A
SRC 1 RMS Ia:

0.000 A
SRC 1 RMS Ib:

0.000 A
SRC 1 RMS Ic:

0.000 A
SRC 1 RMS In:

0.000 A
SRC 1 PHASOR Ia:

0.000 A 0.0°
XFMR INITIAL LOSS OF LIFE
command.
See below
See page 6-19
See page 6-19
See page 6-20
See page 6-20
See page 6-21
See page 6-21
See page 6-22
See page 6-23
See page 6-23
T60 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
setting or