GE T60 Instruction Manual page 625
Transformer protection system
Hide thumbs
Also See for T60:
- Instruction manual (796 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (718 pages)
Table of Contents
Advertisement
CHAPTER 6: ACTUAL VALUES
The metered phase current values are displayed in this menu. The "SRC 1" text gets replaced by whatever name was
programmed by the user for the associated source (see
6.4.3.3 Ground current metering
ACTUAL VALUES METERING SOURCE SRC 1 GROUND CURRENT
GROUND CURRENT
SRC 1
The metered ground current values are displayed in this menu. The "SRC 1" text is replaced by the name programmed by
the user for the associated source (see
6.4.3.4 Phase voltage metering
ACTUAL VALUES METERING SOURCE SRC 1 PHASE VOLTAGE
PHASE VOLTAGE
SRC 1
T60 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
SRC 1 PHASOR Ib:
0.000 A
0.0°
SRC 1 PHASOR Ic:
0.000 A
0.0°
SRC 1 PHASOR In:
0.000 A
0.0°
SRC 1 ZERO SEQ I0:
0.000 A
0.0°
SRC 1 POS SEQ I1:
0.000 A
0.0°
SRC 1 NEG SEQ I2:
0.000 A
0.0°
SETTINGS SYSTEM SETUP SIGNAL SOURCES
SRC 1 RMS Ig:
0.000 A
SRC 1 PHASOR Ig:
0.000 A
0.0°
SRC 1 PHASOR Igd:
0.000 A
0.0°
SETTINGS SYSTEM SETUP SIGNAL SOURCES
SRC 1 RMS Vag:
0.00 V
SRC 1 RMS Vbg:
0.00 V
SRC 1 RMS Vcg:
0.00 V
SRC 1 PHASOR Vag:
0.000 V
0.0°
SRC 1 PHASOR Vbg:
0.000 V
0.0°
SRC 1 PHASOR Vcg:
0.000 V
0.0°
SRC 1 RMS Vab:
0.00 V
SRC 1 RMS Vbc:
0.00 V
SRC 1 RMS Vca:
0.00 V
METERING
).
).
6
6-19
Advertisement
Table of Contents
