Transducer Inputs And Outputs; Distance - GE T60 Instruction Manual
Transformer protection system
Hide thumbs
Also See for T60:
- Instruction manual (796 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (628 pages)
Table of Contents
Advertisement
METERING
6.4.14 Transducer inputs and outputs
ACTUAL VALUES METERING TRANSDUCER I/O DCMA INPUTS DCMA INPUT xx
DCMA INPUT xx
Actual values for each DCmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
ACTUAL VALUES METERING TRANSDUCER I/O RTD INPUTS RTD INPUT xx
RTD INPUT xx
Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value.
6.4.15 Distance
ACTUAL VALUES METERING DISTANCE
DISTANCE
6
6-28
DCMA INPUT xx
0.000 mA
RTD INPUT xx
-50 °C
AB LOOP RESISTANCE
RAB: 0.00 Ohms
AB LOOP REACTANCE
XAB: 0.00 Ohms
AB LOOP IMPEDANCE
ZAB: 0.00 Ohms
AB LOOP IMPEDANCE
ANGLE: 0.00 DEG
BC LOOP RESISTANCE
RBC: 0.00 Ohms
BC LOOP REACTANCE
XBC: 0.00 Ohms
BC LOOP IMPEDANCE
ZBC: 0.00 Ohms
BC LOOP IMPEDANCE
ANGLE: 0.00 DEG
CA LOOP RESISTANCE
RCA: 0.00 Ohms
CA LOOP REACTANCE
XCA: 0.00 Ohms
CA LOOP IMPEDANCE
ZCA: 0.00 Ohms
CA LOOP IMPEDANCE
ANGLE: 0.00 DEG
AG LOOP RESISTANCE
RAG: 0.00 Ohms
AG LOOP REACTANCE
XAG: 0.00 Ohms
AG LOOP IMPEDANCE
ZAG: 0.00 Ohms
AG LOOP IMPEDANCE
ANGLE: 0.00 DEG
T60 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
Advertisement
Table of Contents
