Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KanexPro EXT-HDBT70M
Summary of Contents for KanexPro EXT-HDBT70M
- Page 1 EXT-HDBT70M HDBaseT Extender All Rights Reserved Version: EXT-HDBT70M_2017V1.1...
-
Page 2: Fcc Statement
HDBaseT Extender Preface Read this user manual carefully before using this product. Pictures shown in this manual is for reference only, different model and specifications are subject to real product. This manual is only for operation instruction only, not for any maintenance usage. The functions described in this version are updated till June 2017. -
Page 3: Safety Precautions
HDBaseT Extender SAFETY PRECAUTIONS To insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. Unpack the equipment carefully and save the original box and packing material for possible future shipment ... -
Page 4: Table Of Contents
HDBaseT Extender Table of Contents 1. Introduction ........................1 1.1 Introduction to EXT-HDBT70M ................1 1.2 Features ......................1 1.3 Package Contents ....................1 2. Panel Description ......................2 2.1 Transmitter ......................2 2.2 Receiver ......................3 3. System Connection ..................... 4 3.1 Usage Precautions ..................... -
Page 5: Introduction
It uses HDBaseT™ technology to transmit uncompressed, high-resolution 1080p/ 4K signals from transmitter to the receiver via a CAT5e/CAT6a cable at a distance of up to 70/40m. Moreover, EXT-HDBT70M supports CEC, bi- directional RS232 & IR control, and bi-directional PoH (power over HDBaseT) function. -
Page 6: Panel Description
HDBaseT Extender 2. Panel Description 2.1 Transmitter Name Description HDBT Link status indicator: ▪ OFF: No Link LINK ① ▪ GREEN:Link Successful Blinking GREEN: Link abnormal ▪ HDCP compliant indicator ▪ OFF: No HDMI traffic (no picture) HDCP ② ▪ GREEN: Traffic with HDCP. -
Page 7: Receiver
HDBaseT Extender 2.2 Receiver Name Description HDBT Link status indicator: ▪ OFF: No Link LINK ① ▪ GREEN:Link Successful ▪ Blinking GREEN: Link abnormal HDCP compliant indicator ▪ OFF: No HDMI traffic (no picture) HDCP ② ▪ GREEN: Traffic with HDCP. ▪... -
Page 8: System Connection
HDBaseT Extender 3. System Connection 3.1 Usage Precautions ▪ System should be installed in a clean environment and has a prop temperature and humidity. ▪ All of the power switches, plugs, sockets and power cords should be insulated and safety. ▪... -
Page 9: Application
HDBaseT Extender Step4. Both transmitter and receiver have IR IN and OUT. When one end is used as an IR receiver, the signal sent from the end can only be transmitted via the other end. For example: When “IR IN” of transmitter connects with an IR receiver, the IR emitter must connect to IR OUT of Receiver. -
Page 10: Specification
HDBaseT Extender 4. Specification Transmitter Input Signal (1) HDMI, (1) IR; (1) RS232 (1) HDMI female; (1) 3.5mm mini jack; Input Connector (1) 3p captive screw connector Output (1) RJ-45, (1) IR, (1) RS232 (1) RJ-45; (1) 3.5mm mini jack; Output Connector (1) 3-pin captive screw connector (1) Digital audio,transmit through HDMI audio... - Page 11 60Hz 1280x800 60Hz 1600x1200 60/65/70/75/85Hz 1280x1024 60/75/85/96Hz 1024x768 60/70/75/85Hz 800x600 56/60/72/75/85Hz 640x480 60/72/75Hz Note: EXT-HDBT70M supports 4K HDMI signals up to 30Hz, please adopt quality HDMI cables compliant with the latest HDMI specs for reliable transmission. P a g e...
-
Page 12: Panel Drawing
HDBaseT Extender 5. Panel Drawing 115 mm 5-1 Transmitter 115 mm 5-2 Receiver P a g e... -
Page 13: Troubleshooting & Maintenance
Check the grounding and make sure all the components are properly grounded ▪ to a common ground. Improper grounding may cause damage to the receiver. If your problem persists after following the above troubleshooting steps, seek further help from authorized dealer or our technical assistance at support@kanexpro.com P a g e... -
Page 14: After-Sales Service
HDBaseT Extender 7. After-sales Service If there appear some problems when running the device, please check and deal with the problems reference to this user manual. Any transport costs are borne by the users during the warranty. Product Limited Warranty: We warrants that its products will be free from defects in materials and workmanship for three years, which starts from the first day the product leaves warehouse (check the SN mark on the product). -
Page 15: Warranty
KanexPro has been advised of the possibility of such damages. - Page 16 1405 pioneer street Brea, CA 92821...
Need help?
Do you have a question about the EXT-HDBT70M and is the answer not in the manual?
Questions and answers