SafetyBUS p interfaces
SafetyBUS p main branch
Connection to the SafetyBUS p main branch is via a male 9-pin D-Sub connector.
Fig. 4: Configuration of the interface to the SafetyBUS p main branch
SafetyBUS p sub branches
Connection to the SafetyBUS p sub branches is via 4-pin screw connectors.
Fig. 5: Configuration of the interface to the SafetyBUS p sub branches
Operating Manual: PSS SB ACTIVE JUNCTION BASIS
Male 9-pin D-Sub connector
9-pin
1
6
9
5
X1
1 2 3 4
1: n.c.
2: CAN_L
3: CAN_GND (white)
4: n.c.
5: CAN_SHLD
6: n.c.
7: CAN_H
8: Supply voltage for fibre-optic couplers
from Pilz
9: n.c.
n.c. = not connected
X2
1 2 3 4
(brown)
(green)
4-pin screw connectors
(X1/X2)
1: CAN_L
(brown)
2: GND
(white)
(CAN_GND and VCC_GND)
3: CAN_H
(green)
4: VCC
(red)
(carried supply voltage 24 V)
9