Safety; Emcd; Esd; Warranty And Liability - Pilz 20 748-03 Operating Manual

Safety

The PSS SB ACTIVE JUNCTION BASIS is not a safety-related device.

EMCD

The device is designed for use in an industrial environment. Interference may
occur if used within a domestic environment.

ESD

CAUTION!
Electrostatic discharge can damage components on the device. Ensure against
discharge before touching the device, e.g. by touching an earthed, conductive
surface or by wearing an earthed armband.

Warranty and liability

All claims to warranty and liability will be rendered invalid if:
• The system was used contrary to the purpose for which it is intended
• Damage can be attributed to not having followed the guidelines in the
documentation
• Operating personnel are not suitably qualified.
• The housing was opened
• Any type of modification has been made (e.g. exchanging components on the
PCB boards, soldering work etc.)

Safety guidelines

The information and requirements stipulated in the "SafetyBUS p Installation
Manual" are valid when using the PSS SB ACTIVE JUNCTION BASIS (see
SafetyBUS p System Manual). Failure to comply with these stipulations will
render all warranty and liability claims invalid.
The guidelines in the "SafetyBUS p - IP67 Physical Layer Concept" of the
SafetyBUS p Club International e. V. must also be met.

Disposal

The device must be disposed of properly when it reaches the end of its service
life.
6 Operating Manual: PSS SB ACTIVE JUNCTION BASIS