Back Up/Restore/Capture The Os Image With Microscan Rescue Utility - Microscan HAWK MV-4000 Manual

Back Up / Restore / Capture the OS Image with Microscan
Rescue Utility
The Microscan Rescue Utility offers three choices of operation:
Restore OS.
1.
Backup/Capture OS.
2.
Copy Microscan Rescue Tool to USB storage device.
3.
To access the Microscan Rescue Utility, see the
section of this document.
Note: If the hard drive is corrupted or the system cannot boot, see
Factory Settings for more details.
Back Up OS
This operation allows you to save (back up) your current OS to a storage device so you can
restore it later using the Microscan Rescue Utility's Restore OS feature.
Important: Before continuing this operation, disable the Unified Write Filter (UWF).
To save (back up) the operating system, do the following:
Save all your work and close all running applications.
1.
Start OSConfig.exe and go to the Capture OS tab. Click on the Reboot and Launch
2.
Backup Tool button. This will reboot the device. Then click OK on the next screen.
HAWK MV-4000 Smart Camera Guide
Back Up / Restore / Capture the OS Image with Microscan Rescue Utility
Access Microscan Rescue Utility
Restore to Microscan
G
G-11