Microscan HAWK MV-4000 Manual page 111

F
MEMFRAGS [-cp]
Returns memory fragments for device or coprocessor.
MEMINFO [-cp] [-v]
Returns memory summary "avail/contig/frags" for device or coprocessor. Verbose.
OFFLINE
Stops all inspections.
ONLINE
Starts all inspections.
ONLINE?
Queries if the camera is online.
QUERYAUTOCAL
Returns photometry settings: Gain, Exposure, and Focus.
QUERYFOCUSUNITS
Queries the units being used for autofocus, mm (0) or inches (1).
QUERYWHITEBAL
Returns white balance settings: RED gain, BLUE gain, and GREEN gain.
QUICKFOCUS
Performs an autofocus by analyzing the area around the specified point.
READY? [-insp=n]
Queries if inspection is waiting for a trigger. Defaults to first inspection is not specified.
REBOOT [-noload]
Reboots the device.
-noload = do not load BOOT job.
RESTOREWBAL
Restores preset white balance parameters: RED gain, BLUE gain, and GREEN gain.
HAWK MV-4000 Smart Camera Guide F-5