Table of Contents
Advertisement
Porsche Dynamic Chassis
Control (PDCC)
Function
Porsche Dynamic Chassis Control (PDCC) is a
system for roll stabilisation of the vehicle body
when driving. Driving comfort and driving safety
are improved by active intervention of the anti-roll
bars on the front and rear axles.
No separate controls are available for the PDCC
system.
After selection of a running-gear setup in Porsche
Active Suspension Management (PASM):
– comfort
– normal
– sport
PDCC automatically activates the corresponding
on-road driving programme.
f For information on selecting a running-gear
setup: Please observe the chapter "PORSCHE
ACTIVE SUSPENSION MANAGEMENT (PASM)"
on Page 181.
PDCC automatically activates the off-road driving
programme if Low Range reduction is switched
on.
182
Driving and Driving Safety
f For information on switching Low Range reduc-
tion on and off:
Please observe the chapter "DRIVING
PROGRAMMES FOR ON-ROAD AND OFF-ROAD
DRIVING" on Page 164.
Warning message
A warning message appears on the multi-purpose
display of the instrument panel if there is a system
fault.
f For further information on warning messages
on the multi-purpose display:
Please observe the chapter "OVERVIEW OF
WARNING MESSAGES" on Page 135.
f Adapt your driving style to the changed condi-
tions.
f Consult a qualified specialist workshop in
order to remedy the fault. We recommend that
you use a Porsche partner for this work since
these are staffed with trained personnel and
have the necessary parts and tools.
Checking hydraulic fluid
Regular checking and changing of the hydraulic
fluid takes place as part of servicing.
Further important information on "Maintenance"
can be found in a separate chapter.
f Please observe the chapter "NOTES ON
MAINTENANCE" on Page 236.
Advertisement
Table of Contents
