Replacing bulbs at rear
1. Unscrew fastening screws D with the cross-
head screwdriver from the tool kit.
2. Remove lamp bracket C.
312
Minor Repairs
E - Rear fog light
F - Direction indicator
G - Reversing light
3. Replace the defective bulb (bayonet fitting).
Insert lamp bracket and screw in fastening
screws.
4. Install tail light.
5. Check operation of lights.
6. Close the rear lid.
Number plate lights
Changing bulb for number plate light
1. Unscrew both screws A and remove the light.
2. Push the bulb holder apart and pull the bulb out
of the socket.
3. Replace defective bulb.
4. Insert light, initially tighten both screws A and
then screw in uniformly.