Table of Contents
Advertisement
The rain sensor remains switched off if the wiper
stalk is already in position 1 when the ignition is
switched on.
To switch the rain sensor on again:
f Move wiper stalk to position 0 and then to
position 1 – switching on is confirmed by one
wipe of the windscreen – or
f Operate windscreen washer system 5 –
switching on is confirmed by three wipes of the
windscreen – or
f Change the sensitivity of the rain sensor with
four-stage switch A.
102
Lights, Direction Indicators and Windscreen Wipers
Changing the sensitivity of the rain sensor
Sensitivity can be set with switch A in 4 stages:
f Move rotary switch A upwards –
high sensitivity.
The setting is confirmed by one wipe of the
windscreen.
f Move rotary switch A downwards –
low sensitivity.
2 – Front windscreen wiper – slow
f Move wiper stalk upwards to the second click.
3 – Front windscreen wiper – fast
f Move wiper stalk upwards to the third click.
Rain sensor operation is automatically activated at
speeds of less than approx. 4 km/h (2.5 mph) if
the windscreen wiper is switched on. If you exceed
a speed of approx. 8 km/h (5 mph), the system
switches to the preselected wiper speed.
4 – Front windscreen wipers – one-touch
operation
f Press the wiper stalk downwards. The front
windscreen wipers carry out one wiping cycle.
Advertisement
Table of Contents
