Table of Contents
Advertisement
Halogen headlights
Changing bulb for dipped beam/high beam
1. Press down both release tabs A and remove
cover.
302
Minor Repairs
2. Turn bulb socket B counter-clockwise and
remove.
3. Remove defective bulb and replace.
4. Insert bulb socket and turn in clockwise direc-
tion.
Make sure that the bulb is installed in the
correct position.
5. Fit cover on headlight.
Both release tabs must be fully engaged.
6. Install headlight.
7. Check operation of bulbs.
8. Close bonnet.
Advertisement
Table of Contents
