Table of Contents
Advertisement
Air to central and side vents
f Press button
.
– Front control panel:
The air flows from the front central and side
vents.
– Rear control panel:
The air flows to the central vents.
f Vents must be open.
Air to footwell
f Push button
forward or back.
The air flows to the footwell.
Ending air distribution functions
f Press corresponding button again or press
AUTO button C.
68
Air Conditioning, Parking Heater and Rear Window Heating
Accepting settings for driver's side for the
entire vehicle
The Mono function allows the temperature and air
quantity settings for the driver's side to be
accepted for the entire vehicle.
Switching on MONO function
f Press button
on the front control panel
for 2 seconds.
The text MONO appears on the air-conditioning
display.
Ending MONO function
f Press button
on the front control panel
for 2 seconds or
f Change the settings in the air-conditioned
areas.
Switching on automatic
circulating-air mode
f Press button
on the front control
panel once.
The indicator light in the button lights up.
Control of the outside-air supply depends on
the air quality.
Note
The recommended operating mode is automatic
circulating-air mode.
Switching on circulating-air mode
d
Warning!
Risk of accident due to hampered vision.
In circulating-air mode, the windows may
mist up.
f Only select circulating-air mode for short
periods.
f If the windows mist up, switch circulating-air
mode off immediately by pressing the circu-
lating-air mode button again and select the
"Windscreen defrost" function.
f Press button
on the front control panel
twice.
The indicator light in the button lights up.
The outside-air supply is interrupted and only
the inside air is circulated.
Note on operation
If the air-conditioning compressor is switched off
manually or automatically, circulating-air mode
ends after approx. 3 minutes.
Advertisement
Table of Contents
