Table of Contents
Advertisement
Setting compass
The display is available only for vehicles equipped
with Porsche Radio CDR-23 and magnetic field
sensor.
If you drive your vehicle across the magnetic field
zone set on the multi-purpose display, you must
enter your current zone in the COMPASS menu
(see illustration).
1. MAIN MENU
>SETTINGS
> COMPASS
Select and confirm.
2. Select SET ZONE xx.
3. Confirm selection.
4. Select zone.
The setting is changed in increments of 1 by
pressing the rocker switch.
5. Confirm selection.
Calibrating compass
In rare cases, external disturbances may
necessitate calibration of the compass. The
warning message "CAL." then appears on the
multi-purpose display.
f To calibrate the compass, follow the displayed
instruction DRIVE IN A FULL CIRCLE.
The display returns to the main menu after
successful calibration.
Multi-Purpose Display and Instruments
133
Advertisement
Table of Contents
