Porsche Turbo 2007 Driver Manual page 89

Table of Contents

Advertisement

Comfort function on vehicles without
Porsche Entry & Drive
Opening and closing the Panorama roof
system
f Hold the car key in the door lock in the
unlocking or locking position until the windows
and the Panorama roof system have reached
the desired position.
Comfort function on vehicles with
Porsche Entry & Drive
Opening and closing the Panorama roof
system
f Hold the car key in the door lock in the
unlocking or locking position until the windows
and the Panorama roof system have reached
the desired position.
Closing the Panorama roof system
f Hold the button in the door handle when
locking the vehicle until the windows and the
Panorama roof system have reached the
desired position.
88
Windows and Sliding Roofs
Force limiter for the Panorama roof
system
All roof elements are equipped with a force limiter.
If the sliding roof element or the sliding roof/lifting
roof element is obstructed during the closing or
opening process, the respective roof element
opens or closes again immediately.
Closing a roof element after activation of
the force limiter
1. Remove the obstruction.
2. Turn rotary switch to position A again.
Electric emergency closing function
d
Warning!
Risk of injury from the emergency closing
function for the Panorama roof system.
The force limiter is not available and the
roof elements will close with full force.
f Take care to ensure that nobody can be injured
when the Panorama roof system is closed.
If the roof cannot be closed due to dirt, ice or a
similar reason:
1. Turn rotary switch to position A.
2. Hold the rotary switch in position A until all roof
elements are completely closed.
Storing final position of the Panorama
roof system
The final positions of the Panorama roof system
are lost after disconnecting/reconnecting the
vehicle battery or if the battery is exhausted as
well as after jump lead starting.
d
Warning!
Risk of injury when closing the Panorama
roof system. The force limiter is not available
and the roof elements will close with full
force.
f Take care to ensure that nobody can be injured
when the Panorama roof system is closed.
1. Switch ignition off.
2. Turn rotary switch to position A.
3. Switch ignition on.
4. Press rotary switch up at its front edge in
position A and keep pressed.
The teaching process begins after around
5 seconds. Keep the rotary switch pressed in
position until the roller blind and all roof
elements have completely stopped moving.
The process lasts a maximum of 20 seconds.
5. Release the rotary switch.
The raised sliding/lifting roof element 3 closes
automatically. The teaching process is then
completed.

Advertisement

Table of Contents
loading

Table of Contents