Table of Contents
Advertisement
Vehicles with sill cover
Rear jacking point
2. Attach jack only at the points provided G or I.
Fitting covering cap:
f Insert the covering cap F or H completely in
the slots of the sill cover with both centring
lugs and fold back until it can be felt to engage.
Changing a Wheel
1. Remove the top wheel bolt.
2. Remove assembly aid from the tool kit and
screw in instead of the wheel bolt.
3. Remove the remaining wheel bolts.
For further information on wheel bolts:
Please observe the chapter "WHEEL BOLTS"
on Page 268.
4. Change wheel.
5. Insert wheel bolts and tighten by hand.
Remove assembly aid, screw in remaining
wheel bolt.
Initially tighten bolts only slightly in diagonally
opposite sequence so that the wheel is
centred.
Minor Repairs
275
Advertisement
Table of Contents
