Porsche Dynamic Chassis Control (Pdcc) - Porsche Cayenne Owner's Manual

Porsche Dynamic
Chassis Control (PDCC)
Function
Porsche Dynamic Chassis Control (PDCC) is a sys-
tem for roll stabilization of the vehicle body when
driving. Driving comfort and driving safety are
improved by active intervention of the anti-roll bars
on the front and rear axles.
No separate controls are available for the PDCC
system.
After selection of a running-gear setup in Porsche
Active Suspension Management (PASM):
– comfort
– normal
– sport
PDCC automatically activates the corresponding
on-road driving program.
f For information on selecting a running-gear
setup:
Please observe the chapter "PORSCHE ACTIVE
SUSPENSION MANAGEMENT (PASM)" on
Page 217.
PDCC automatically activates the off-road driving
program if Low Range reduction is switched on.
218
Driving and Driving Safety
f For information on switching Low Range
reduction on and off:
Please observe the chapter "DRIVING PRO-
GRAMS FOR ON-ROAD AND OFF-ROAD DRI-
VING" on Page 199.
Warning message
A warning message appears on the multi-purpose
display of the instrument panel if there is a system
fault.
f For further information on warning messages
on the multi-purpose display:
Please observe the chapter "OVERVIEW OF
WARNING MESSAGES" on Page 168.
f Adapt your driving style to the changed
conditions.
f Consult an authorized Porsche dealer in order
to remedy the fault.
Checking hydraulic fluid
Regular checking and changing of the hydraulic
fluid takes place as part of servicing.
Further important information on "Maintenance"
can be found in a separate chapter.
f Please observe the chapter "CAR CARE IN-
STRUCTIONS" on Page 298.