Ignition Lock/Steering Lock - Porsche Turbo 2007 Driver Manual

Key positions
0 - Initial position
1 - Ignition on
2 - Start engine
3 - Ignition off

Ignition lock/steering lock

The ignition lock has a total of four ignition lock
positions.
Note on operation
The vehicle key rebounds to the initial position
from every ignition lock position.
Key positions with Porsche Entry & Drive
0 - Initial position
1 - Ignition on
2 - Start engine
3 - Ignition off
For vehicles that have Porsche Entry & Drive
you do not need to insert the key into the ignition
lock but merely keep it with you. The ignition key
is replaced by a control unit in the ignition lock
which always remains in the ignition lock, unless
the vehicle is being towed.
Removing the control unit from the ignition
lock
f Press button A and remove the control unit.
Key position 0 – initial position
The ignition key cannot be withdrawn when the
ignition is switched on or when the engine has
been started.
To withdraw the ignition key:
f Stop the vehicle.
f On vehicles with Tiptronic S:
Move Tiptronic selector lever to position P.
f Switch ignition off.
f Remove ignition key.
Note on operation
The vehicle battery discharges if the ignition key is
left inserted.
f If the vehicle battery is dead, the key can only
be pulled out of the ignition lock if the
emergency operation is performed:
Please observe the chapter "EMERGENCY
OPERATION – RELEASING THE IGNITION KEY"
on Page 148.
Driving and Driving Safety
147