Table of Contents
Advertisement
1. MAIN MENU
> VEHICLE INFO
Select and confirm.
2. Select WARNINGS.
3. Confirm selection.
NO WARNING is displayed if the vehicle is in
perfect condition. Any warning messages
which are present are displayed.
4. Press rocker switch repeatedly to display the
warnings one after the other.
5. Confirm selection.
VEHICLE INFO menu is displayed.
Note on operation
f For information on the operating principle of
the multi-purpose display:
Please observe the chapter "OPERATING
PRINCIPLE" on Page 112.
Displaying status of level control
The ground clearance of vehicles equipped with
level control is shown in the LEVEL menu.
1. MAIN MENU
> VEHICLE INFO
Select and confirm.
2. Select LEVEL.
3. Confirm selection.
The current level settings are displayed.
4. Confirm selection.
VEHICLE INFO menu is displayed.
Note on operation
The level control is adjusted by means of the
rocker switch behind the gearshift lever in the
centre console.
f For information on level control and
height adjustment:
Please observe the chapter "AIR SUSPENSION
WITH LEVEL CONTROL AND HEIGHT ADJUST-
MENT" on Page 178.
Displaying status of locks/
reduction
The selected driving programmes for Low Range/
High Range as well as the engaged locks can be
displayed.
1. MAIN MENU
> VEHICLE INFO
Select and confirm.
2. Select LOCKS/REDUCT.
3. Confirm selection.
The current settings for
– Longitudinal lock on/off
– Reduction on/off
– Transverse lock on/off
are displayed.
4. Confirm selection.
VEHICLE INFO menu is displayed.
Note on operation
The driving programmes are set by means of the
rocker switch behind the gearshift lever in the
centre console.
f For information on the programmes for
Off Road and On Road driving and engaging
locks/reduction:
Please observe the chapter "DRIVING
PROGRAMMES FOR ON-ROAD AND OFF-ROAD
DRIVING" on Page 164.
Multi-Purpose Display and Instruments
119
Advertisement
Table of Contents
