Table of Contents
Advertisement
* A jumper connects RC and RH as most combination heat and cooling systems use a single
transformer. For systems where separate transformers are used, remove the jumper in place
across the RC and RH terminals.
Remove old thermostat
terminals
Remove the old thermostat wiring terminals from the wall, taking care not to allow the
wiring to fall inside the wall.
TIP: Wrap the wire ends around a long stick, such as a pencil to keep the wires from falling
into the wall.
4
Smart Home Monitoring | Smart Thermostat | Manufacturer's Installation Guide
Hide quick links:
Advertisement
Table of Contents
