Pic Test Section 8 - HP Series 37 Reference Manual

Error Codes
PIC Test Section 8
Test PIC register 8, 9 & 10 with read/write data only. Register 8 is only tested for lower 8 bits. Register
9 & 10 ($A) are tested for all 16 bits.
0801 Register 8 fails to show data patterns $OOAA.
0802 Register 9 fails to show data patterns $AAAA.
0803
Register 10 fails to show data patterns $AAAA.
0804
Register 8 fails to show data patterns $0055.
0805 Register 9 fails to show data patterns $5555.
0806 Register 10 fails to show data patterns $5555.
PIC Test Section 9
Test DMA Write/Read/Abort from memory to PIC FIFO and from PIC FIFO to memory.
Code Error
0901
CSRQ response & test via OBSI failed the DMA Write to PIC.
0903 Bit 9 of the Interrupt Register (PIC reg 2) should be clear
(no handshake abort) the DMA Write Abort (PIC reg E) test.
0902 Data transferred to the PIC FIFO by the above transfer
(assuming the DMA Write abort test passed) is incorrect.
0904 CSRQ response & test via OBSI failed the DMA Write Abort.
0905
Bit 5 of PIC register B should be set for the DMA Write Abort
termination test.
0906
Bit 6 of PIC register B should be set for the DMA Write Abort
termination test.
0907 CSRQ response & test via OBSI failed the DMA Read from PIC.
0908 Microword at $0390 fails to match the data patterns $1011.
0908
Microword at $0391 fails to match the data patterns $1213.
0908 Microword at $0392 fails to match the data patterns $1415.
0908 Microword at $0393 fails to match the data patterns $1617.
090A CSRQ response & test via OBSI failed for the DMA Read Abort.
090B
Bit
5
of PIC register B should be set for the DMA Read Abort
termination test.
090e Bit 6 of PIC register B should be set for the DMA Read Abort
termination test.
NOV 84
A-7